MACHINE TOOLS

Three-axis gantry-type milling and engraving machine with automatic tool change. Working area: 2,070 × 6,100 mm. Features include a high-power vacuum table, 1,000W servo drives, and an oil mist system for soft metal processing.

G2060

The press brake is composed of two separate press brakes with a 3.05 m long working part, with coaxial positioning, which can work separately or synchronously, allowing bending of components up to 6.1 m long. The sheet bender has a force of 175 tons per 3 m. It has a sheet support and stops for precise positioning of the bending position.

tandem 3+3

Milling and engraving 3-axis machine of portal type, manufactured in Belgium, is equipped with:

COLINBUS

2,070×8,400 mm working field allows working with large-format materials and producing unique parts of long length.

In Panel Builder mode, when working with sheets up to 4 m, the machining is divided into two zones: 'A' and 'B'. While the 'A' zone processes components, the operator in the 'B' zone unloads the finished parts and loads a new sheet.

Two powerful 4.5 kW HSD spindles and the system of chip removal from the cutting area. The installation of two spindles allows the work to be done with two tools at once, eliminating the need to pause to change tools.

The servo drives, each with a power of 1,000 W, allow fast and precise idling at a speed of 1,000 mm/sec, doubling the speed of material processing compared to most machines of this type.

The vacuum table that covers the entire work surface

A6 Laser Cutting Machine with 3,000 W source power, 1,000 mm/s fast servo drives. Cutting field 1,550×6,100 mm, Scanning Cutting system for cutting non-ferrous metals.

A6

3-axis gantry type milling and engraving machine with a working area of 3,100x2,070. Equipped with vacuum table and aspiration system for chip removal from the cutting area.

AXYZ

VACUUM THERMOFORMING STATION

The station consists of: